DF-2000 Torque Chucks

Step Chucks ~ Quick-Disconnect Chucks ~ Slide-On Adapters
Core Kicker ~ Through-Shaft Chuck System

Concentric Torque Chuck Expansion
As the chuck expands to grip a core, it automatically lifts and centers the roll, eliminating roll bounce and vibration.

No Lubrication ~ Minimal Maintenance
Little dust accumulation in the chuck means no jamming and easy removal of cores.

No Sidearm Force Needed, Multiple Core Re-Use, Elimination of End-of-Roll Waste
The DF-2000 chuck grips harder as more torque is applied. Other chucks rely on sidearm force from the machine to push the gripping elements into the core wall. These chucks damage the core and waste material at the end of the roll.

To see a short movie about the DF-2000 core chuck, please click below:

DF-2000 Torque-Activated Shaftless Core Chuck

1	Teflon thrust washer helps to ensure free movement of chuck.
2	Custom machined mounting flange adapts chuck to any roll stand.
3	Smooth gripping jaws with large surface area provide no-slip grip ona any core material without damaging cores.
4	Rollers travel on hex cams with little friction to provide free expansion of jaws. Jaws grip effectively in light or heavy tension applications.
5	Central hex.
6	Spirol pin aligns end cap.
7	End cap.
8	Socket head cap screw.

Please click here if you would like a quotation on the DF-2000 torque chuck.

Feature	Advantage	Benefit
Smooth Gripping Jaws	Interior wall of core is not damaged.	Multiple core reuse.
Smooth Gripping Jaws	Serrations are not used so dust is not created.	No maintenance or jamming, no contamination.
Torque Activation	Extreme sidearm force is not necessary.	Less core distortion and no end-of-roll waste.
		Rolls won’t bow.
		Less roll stand fatigue; extended roll stand life.
Patented Roller Design	Reliable grip regardless of torque magnitude.	Run heavy and/or light rolls with any tension.
	True concentric expansion.	Roll bounce is minimized or eliminated.
	True concentric expansion.	Easier to control web tension.
	Lubrication isn’t needed; dust won’t accumulate.	No jamming; chuck won’t get stuck in cores.
	Little friction inside chuck; less wear on parts.	Little, if any, maintenance and longer chuck life.
	Wide range of expansion.	Run butt rolls and rolls with core inconsistencies.
Step Chuck	Single chuck can run various core sizes.	Roll changes are effortless; even between sizes.
Quick Disconnect Chuck	Interchangeable chucks mount to same plate on machines with width limitations.	One center bolt allows quick change to various core sizes.

DF-2000 Step Chucks
save time when running multiple core sizes

The DF–2000 Step Torque Chuck:

Ideal for applications that require the use of multiple core sizes and where roll stand width capacity is not a concern.
These chucks can be any size with the base chuck being the largest.
Step chucks incorporate all of the features of normally mounted DF–2000 chucks with the top chuck mounted on the base chuck in a Quick Disconnect design.
Top chuck may be swapped with any other size in a few minutes. If only two core sizes are being used, there is never a need to remove the top chuck.

When roll stand throw space is limited, DF-2000 Quick Disconnect Torque Chucks facilitate core size changes
	Quick changes among a variety of core sizes. Specially designed to be swapped on the fly, between rolls if necessary, with a single center bolt. An adapter plate is required for mounting. Best applied where roll stand width capacity is limited and changes of core sizes are frequent.

DF-2000 Slide-On Chuck Adapters
	Chuck adapters are available in cases where multiple core sizes are used and quick changeovers are needed. Roll weights arre limited to the base chuck specifications.

DF-2000 Core Kicker Chucks
	Automatic core ejection system. This “Core Kicker” features a core ejection device which kicks the core off the chuck as the roll stand opens.

DF-2000 Through-Shaft Torque Chucks
	For core sizes larger than three inches (DF-1000 chucking systems available for 3-inch cores). Chuck offers the same characteristics as all DF-2000 chucks, but mounts on a through-shaft in shafted applications. The opposite end of the roll is supported by a retractable roll collar.

More Information About the DF-2000 Torque-Activated Core Chuck:

The DF-2000's patented torque-activated design has made it the world's most effective and best-selling shaftless core chuck. Six precision-ground steel rollers are mechanically linked to travel up and down bi-directional ramps created by the back of the jaws and the hexagonal cam. This rolling action minimizes friction while causing expansion and retraction of the chuck’s jaws. As a result, the chuck can be used in the lightest to heaviest tension applications. The chuck’s mechanical design eliminates the need for the sophisticated and expensive plumbing associated with pneumatic or hydraulic chucks. Rotary unions are also unnecessary with the DF–2000.

There are other chucks which are based on the torque-activated principle, but they use “sliding friction” inside the chuck for expansion. These chucks can’t overcome the friction created by the roll weight to lift and center the roll. A non-centering action results, causing roll bounce and possible jamming. Furthermore, their serrated jaws damage cores and create dust, leading to higher maintenance and more downtime.

Please click here if you would like a quotation on the DF-2000 torque chuck.